Spectrum Window: PVC plastic windows and windows in Nizhny Novgorod
Company "Spectrum Window" produces, installation plastic windows, PVC glazing and finishing of balconies and loggias in Nizhny Novgorod and area. The company has successfully
works in the market since 2004, Continuous improvement methods
production, adequate control over quality of service are
the foundation of our work in the present and future.
For their clients Company provides a guarantee for products and work done. We are doing everything possible, that our products and services have been dostupnymii quality.
Converts
to our people always get a decent level of service and do not regret
this. For each, we try to find the best offer. We
always ready to offer you a flexible system of discounts for plastic windows PVC. Measurement, dismantling
old windows and garbage collection is absolutely free.
Manager Consultant
make for you a personal offer, You have to look,
Do you fit this. Today, in the presence of a plastic windows Of PVC profile SALAMANDER and ARTEC, sliding design for glazing balconies and loggias SLIDORS, descriptions are given below.
Gathering replace old windows new, people are faced with the question,
on what it is to choose. The modern market offers
several kinds of windows: composite wood and laminated veneer lumber, of
metal-plastic and aluminum profiles, as well as combined
model. But the most common, constantly competing with each
other wooden and steel plastic windows. To help you select can
What article windows PVC is better - Plastic or wooden?
The principal difference between modern windows from the usual wooden –
this is the presence in the construction PVC windowsglass. Not without reason to
Consumer slang windows sometimes substitute the word «windows».
What is windows? Already from the title clearly, it
separate glass, collected by a special technology in a single product –
пакет.
Windows SALAMANDER – window from an elite profile
The magnificence of the forms and technical solutions embody the window SALAMANDER. A perfect round profile Foreign and the inner side of the window gives unique view.
The main advantages of windows Salamander:
The unique white, plasticity and smoothness Profile
Impeccable protection against rain and drafts - thanks to highly efficient system of external compression.
Guarantor of the safety and security is a closed reinforcement, treated with special anti-corrosion compound.
Profile produced exclusively in Germany.
Windows SALAMANDER izgotavlivlivaemye a series of profiles of Design 2Dmade of high quality PVC, guaranteeing long-lasting durability, unsurpassed whiteness and glossy shine your plastic windows.
System «2D Design» - classic example of profile systems. Strict lines of the outer contour of the profile, along with traditional Salamander rounding radius of 5 mm create a unique exterior design of the system.
PVC Profile Design 2D - harmonious combination of the forms of modern architecture. Two-loop seal guarantees optimum heat protection and noise insulation.
Overall width 60 mm (frame and sash are shifted) and mounting width of 76 mm (frame and sash in the same plane);
The thickness of the outer walls of the main sections of 3 mm, that provides higher weld strength and uprated for thermal insulation;
Metal amplifiers do not come into contact with the walls of the amplification chamber through a special projection on the walls of the amplifying Camera, which reduces the heat loss on the walls of the amplifier and increases the thermal resistance profile .
Two-loop seal in a profile in combination with a sealing tongue in podstavochnom profile ensures optimum heat protection and noise insulation.
Resistance to impact at subzero temperatures; 10 out of 10 samples at minus 30 degrees Celsius without damage.
Same reinforcement for the frame and sash enables the use of closed-reinforcing in the construction of an elevated requirements for static.
Easy to maintain and extremely persistent in the environment is ensured through alloy surface profile of the brand PVC high density;
Company ARtec Fenstersysteme GmbH Founded in early 1995 in Germany specifically to work with CIS countries. Already in late 1995 in Moscow, was established by a subsidiary of Artek, INC., from the warehouse for the first time in Russia was carried out deliveries of German company. First, a firm specializing in the delivery of core systems PVC for windows, shortly range was supplemented by swing-out furniture, components for assembly and other materials and equipment for the manufacture of windows and glass. In 1996, Russia and Ukraine were established «Turnkey» the first production line of windows and glass, developed software for window production, thus, ARtec become a comprehensive supplier. In 1996, opened new stores in St. Petersburg (Russia) and Kiev (Ukraine). By early 2005 ARtec on 21 warehouses in Russia, 8 warehouses in Ukraine and 2 warehouses in Kazakhstan, just created a new division Artek-Belarus with an office and warehouse in Minsk. Company ARtec is the most advanced supplier of window technology in Russia, Kazakhstan, Belarus and Ukraine. For all products, proper certification, are certified in Germany, Russia and Ukraine.
width 60mm;
Three-chamber profile system;
Camera geometry, optimized for maximum insulation;
the use of glass of different thickness;
Seals have been tested for the operating conditions at low temperatures to -60C;
fillet with a coextruded, pressed into and plug gasket;
high static strength, ensured by the presence of steel reinforcement;
resistance to wind and rain loads;
hidden system controlled condensate drain
ARTEC STANDARD - profiles of this system, as well as other window systems ARTEC made in Germany from akrilmodifitsirovannogo PVC powder of high toughness grade VESTOLIT. The combination of profiles meets the requirements of RAL and quality control SKZ. Product quality is confirmed by certificates of Germany and Russia.
Hardware - this is supporting material, Various small parts. When people talk about the fittings windows, mean window locks, pens, loop. Today is not a problem to find high-quality fittings. The main quality accessories МАСО (Austria)– it's durability and strength.Accessories ISSA has three anti-corrosion layer:
zinc coating;
environmentally friendly trivalent chromium, giving the fittings silver color;
Synthetic wax, protecting and lubricating the contacting in-service hardware details.
The advantages of hardware Maco
Built-in protection from sagging doors - lifter. This device protects the window from sagging in the closed, proper in which leaf is up to 80% of their time.
Built-in lock on the doors slamming in a draughty. In the tilted position of the sash windows, not having this option, can arbitrarily shut at the time of airing.
. This feature is in the window provides a quick influx of fresh air without drafts.
Lower loop, In addition to the adjustments move the sash horizontally and vertically, is adjusted on the clamp.
Locking error opening (prevents erroneous opening of sashes in a rotary position).
Loop accessories МАСО bear the weight of 130 kg and designed for 40,000 cycles of opening. This means, that it is suitable for all types of windows.
When choosing furniture it is important the smooth running. МАСО and it provides, thus do not have to put more efforts, for example for, to close the window.
Accessories ARtek (Germany) major advantage - a compromise between price and quality.
Slidors - is more space. Sliding design (compared with the swing) significantly saves space and increases the useful area. You can walk freely on their balcony.
Slidors - this strength and environmental. Profile is made of environmentally friendly PVC, corner joints - a special plastic, having a heavy-duty characteristics. Galvanized fittings inside the profile increases strength and stability design. Slaydors warmer aluminum, durable than wood and less swing PVC windows.
Slidors - is protection from the wind, snow and rain. Double brush seal with a special water-and windproof insert provides enhanced leak even with the pouring rain.
Slidors - a protection against insects. Mosquito netting is easily moved along the entire construction of a special outside rail and can be installed in any sector of the window.
1. The first step to designing and installing windows –
measuring apertures. It must hold within, and outside. Size
aperture can be significantly altered by the removal of plaster. Before
immediate start of work to take care of the domestic
space: it is desirable to cover the furniture and equipment (If window replacement
does not take place during the general repair) Polyethylene.
2. Dismantling of old windows can cause you a dilemma –
that save in the most general form: the opening or frame? For new
structures, course, preferred the first option.
3. In the preparation of the window opening for installation
must, that it was aligned (by shtukaturno-putty
corrections chips and gouges) and thoroughly cleaned from dust and debris.
4. Installation of plastic windows - setting the framework without
wings and glass on the support and spacer strip. The window should
be focused absolutely perfectly in line with the indications
instrumentation (desirable to consider these so-called level and plumb,
the latter must be the absolute axial symmetry and sharp tip).
Qualitative installation of plastic windows determined by setting
waterproofing and vapor barrier tape, that protect the installation
joints from destruction. The window must be fixed using special
fasteners (construction screws, anchor bolts and plates) not
with only two parties, but also around the perimeter with step fastening no more
70 cm, an important type of work - sealing the windows, for these purposes
use a special polyurethane foam. Over time, she may lose
elasticity and color, therefore it is necessary to protect its layer of sealant,
plaster or paint. To empower the foam waterproofing properties
(that it is protected from rain) it should be required to cover any
waterproofing material (quite suitable silicone sealant or
paint). Also suggested to use mechanical fasteners, as
dried foam is capable of changing its volume under the influence of temperature on
value of 5%. For larger window sizes width joint between the wall and
window frame shall not exceed 3 cm.
5. The final stage is made by drying
foam and is, mostly, accessories and cosmetics
character: closed joints, set window sills, regulated
Accessories, with profiles removed the protective film (better do it
immediately, since this film is not designed for continuous operation, and
under the sun, it quickly loses its elasticity and strength and
transformed into a layer of paint absolutely will not wash).
Installation of plastic windows: what to look for...
thickness of the glass should be not less than 32
mm, if the window overlooks the street and you do not have air conditioning; If the window
overlooks the gazebo, then you should not overpay – will
enough in Europe 24 mm glass;
optimal distance between the plates is
within 10-16 mm. Decreasing this distance leads to a sharp
deterioration of insulation due to the appearance of so-called «pryamoluchevoy
transmission» heat from glass to glass, bypassing the air gap.
The increase of this distance does not make sense, because they do not provide
significant effect on heat transfer due to the appearance
convective flow of air inside the glass;
The window must be at the lower bearing pads,
are not removed after installation. In no case do not allow,
window to «hung» for dowels, as the weight of metal-plastic windows
triple-pane windows can reach 150 kg, and no polyurethane foam,
not dowels it will not keep. Of course, have these pads should be
near vertical elements: the corners of the frame and a vertical
septa-impost in the frame.
In any room, regardless of its destination, must be solved
problem of constant air. This is especially important for residential buildings.
Ventilation systems in our homes are constructed simple way: to extract
kitchen, in a closet or bathroom, as well as the flow of air provided for
through cracks in window openings. Provide permanent ventilation to
room - one of the essential functions of the window.
However, modern plastic windows – design with 2-3 circuits
seal of elastic material in the vestibule, and with a very dense
landing in the glass cover. Breathability of the windows in
closed state is very small. Due to violations of air
increases the relative humidity in the cold season in
surface of the glass appears condensate, Window on the slopes and
walls formed by the mold. Most susceptible to the emergence of fungi children
and bedrooms. In third place - bathrooms and showers. More often it
phenomenon occurs in older homes, than in new buildings.
Thus, the question of ventilation in the room, which establishes the
plastic windows, is particularly acute. After ventilation can not
just get rid of odors and carbon dioxide, but also to regulate
humidity.
Practically all modern plastic windows, there are four
state the degree of open-closed: closed, door wide open,
slotted flap has been dropped airing. When the mode gap
ventilation flap moves away from the frame at 1-3 mm around the perimeter. When
This gap in the dust falls, as well as increased noise levels. In winter,
constant presence of windows in the slotted mode of ventilation leads to
the emergence of drafts.
Currently, many manufacturers of plastic windows have already started
production of special systems and air handling devices. In the Russian
construction market has already emerged PSHU Window (acoustic inlet
Devices) firms "Aldes" and "Aereco" (France), "Renson" (Belgium),
"Tython" (England), KBE and "Grace Unitas" (Germany) and several other.
Inlet valve can be installed on the box, or through the wall
next to the window. Setting the window easier and cheaper. Mounted air inlet
device is a must at the top, Then a breath of fresh
air will go up to the ceiling and gently move around the room
together with an internal air.
To date, there are models with control
airflow and without control. Moreover, among devices with
adjustable stand model with manual control and
automatic. Automatic control is more convenient - the flow
increases or decreases depending on the humidity in the
indoors.
Choosing fresh air noise protection device is also important to bear in mind,
that in use during the cold season may be a number of problems.
So, in contact with a jet of cold outside air into a warm room
possible fogging and freezing of the vent valve.
Attention is drawn to the fact, to valve design precluded
such phenomena or negate their probability to a minimum.
Adjustment of plastic windows
In the case of, When the metalplastic windows installed in new house,
After some time they need to adjust. The fact, that the new
buildings must shrink. Due to the shrinkage of the house a perfect seal
sealing systems can be broken. The very design of the windows at the same time
should not suffer, therefore a serious problem that is not.
A good specialist can easily restore the tightness of fit
seals. If necessary, you can do it yourself and
(Allen key 4 mm) - by clamping, the width and height.
When operating the plastic window is very important opportunity to change
sash positions with the help of accessories. The perfect accessories to be
provide such adjustment in three planes and two axes
rotation, and the adjustment of the degree of press the sash to the frame around the
perimeter.
Horizontal adjustment of the upper loop of the group can move
the upper corner of the left - right, while turning the sash or
counterclockwise around the bottom of the loop. A horizontal adjustment
lower loop group provides an opportunity to shift the bottom corner
left - right while turning the sash or counterclockwise
arrows around the top loop.
Through vertical adjustment of the lower loop of
by lifting and lowering valve. In addition, for
swing-out windows are often allows for the rotation along
horizontal axis of rotation, coinciding with the plane of the window by
adjustment press the sash to the frame of the upper loop of.
In case of improper use of the plastic window sash can
hang on the bottom of the loop and throw scissors. To
restore the normal functioning of the window, you must press on
folded edge of the wing perpendicular to its surface to the top
angle approached the loop. One hand to press the lever blocker,
located on the wing in the pen, and the second - turn the knob to
horizontal position. Scissors on the wing and the frame must unite.
After that you can release the lever blocker. In this case, all manipulations
with the handle must be done exclusively at the closed window frame.
However, if you change the position of the valves modern furniture
allows anyone with a window, then work on parts replacement, removal and
installation of doors are best left to professionals. Do not forget that
maladjustment can lead to complete failure of the window.
An important advantage which distinguishes PVC windows, is easy to operate and maintain. Plastic PVC windows to operate virtually require any special maintenance and equipment. Naturally, there are recommendations, following which can significantly extend the life of your windows.
There are certain installation technology PVC windows, which allow fast and, most importantly, to establish a qualitatively window design, which is expected to serve more than one decade.
Self-installation PVC windows - a very responsible action, tayaschee large number of "pitfalls", to avoid which is not always able even to specialists. Improper installation of plastic glass can easily negate the expected result of their application.
So, PVC windows with its low price cheap to maintain and, moreover, can be recycled after the end of life. Industrial studies have shown that PVC windows environmentally friendly, are not subject to corrosion and are not afraid of frost and sunlight. PVC profile trudnovosplamenim and resistant to atmospheric precipitation, the major acids, alkalis and industrial gases. For PVC profile do not operate gasoline, kerosene and various alcohols. Only partially soluble polyvinyl chloride in acetone and benzene.
Hardware - this is supporting material, Various small parts. When people talk about the fittings windows, mean window locks, pens, loop. Today is not a problem to find high-quality fittings. The main quality accessories МАСО (Austria)– it's durability and strength.Accessories ISSA has three anti-corrosion layer:
